|Spacer Bar Type|
Crane Sling Kit
£1,750.93 Excluding VAT
The Crane sling and Spacer Bar by ProMove is the only sling world-wide suitable and rated for lifting a bariatric person by crane or rope and pulley. The kit comprises: crane sling, (incorporating head support and red X shaped safety harness), two piece metal spacer bar, 2 x stirrups, dignity sheet, set of 6 adjustable anchor straps, set of 12 steel connectors, large tubular slide sheet, bugg strap, set of 8 extension handles and a large carry bag. Individual crane kit items can be bought separately.
The spacer bar and sling conforms to the following regulations: EN 1498: 2006 / CE / Medical Device Regulation (EU) 2017/745. The Crane sling kit has been rated to a SWL 500 kg (78 stone / 1102 lb), each stirrup has been rated to a SWL 100kg ( 16 stone / 220lb) The Crane Sling and Stirrups are intended for hoisting by crane or rope and pulley. The handles are to assist with getting the sling into place and manoeuvring the individual/casualty before lifting. Safe working loads apply when lifting forces are attached to the appropriate steel points.
Moving bariatric individuals has special problems and careful planning and risk assessment is needed. Placing a bariatric individual on their back may not be possible because of health or location problems. In some cases this can cause serious respiratory difficulty that may be fatal. If in a seated position, maintain the individual in that position.
The Crane Sling Kit and accompanying devices are intended to be used by professionals fully trained in the relevant rescue and manual handling techniques.
If you are ordering from outside the UK the delivery charges will vary, please call 01970 820 893 or email firstname.lastname@example.org for the exact delivery cost.